Independent contractors, licensed in FL

612 cities and towns covered

Stucco Chimney Repair in Florida

Stucco hides the condition of whatever is behind it. By the time it cracks or sounds hollow, water has usually been behind it for years.

Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about stucco repair

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Stucco Chimney Repair in Florida

What to ask for on Stucco Chimney Repair

  • Cut back to sound material and lath
  • Rebuilt in proper coats
  • Texture matched to the surrounding wall
  • Cause of water entry addressed first
Call us about this
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Dryer vent cleared end to end in Florida
Dryer vent cleared end to end Long attic runs with several elbows pack solid with lint. The trap catches only a fraction of it.
Stucco cut back to sound material in Florida
Stucco cut back to sound material Patching over debonded render bonds new material to something that has already let go.
Stainless cap fitted and secured in Florida
Stainless cap fitted and secured Stainless throughout including the fixings, and mechanically fixed rather than friction-fitted for storm uplift.

Tap it, do not just look at it

Sound stucco rings solid. Stucco that has debonded from what is behind it sounds hollow, and that hollow sound means water has been getting behind the render and has broken the bond. It is usually well advanced before anything is visible.

The visible signs, when they come, are cracking, staining, or render lifting at the edges. Patching over a hollow area does not fix it — the new material is bonded to material that has already let go.

Where the water came from

Stucco repair is the second job. The first is finding how water got behind it: a cracked crown, failed flashing at the roof, a corroded chase cover, or an unsealed penetration. Repairing the render without that is repairing it again next year.

Proper repair method

Cut back to sound material and to the lath, check and replace lath and weather-resistive barrier where needed, rebuild in scratch and brown coats, then finish and match the texture. A skim over the top is not a repair.

Block, frame and what is underneath

Florida chimneys are usually stucco over concrete block, or stucco over a framed chase. The two fail differently and they need different investigation.

Over block

Water behind the render sits against masonry that stays damp, and the block itself may need attention before anything is re-rendered.

Over a framed chase

Considerably more serious — water reaching framing and insulation with no way to dry means rot, and on the coast it means corrosion of fixings too. Opening a patch to look is worth doing before committing to a finish repair.

Stucco Chimney Repair — frequently asked questions

How do I know if my stucco has failed?

Tap it. Hollow means debonded with water behind. Cracking, staining or lifting edges are the visible signs.

Can it just be patched?

Only where the surrounding render is sound. Patching over debonded material fails quickly.

Will the texture match?

A good plasterer will get very close on a like-for-like finish. Exact matching on a weathered wall is difficult, which is why repairs are sometimes taken to a natural break.

Should we waterproof it afterwards?

With a breathable repellent, yes, once it has cured. Never with a film-forming sealant — that traps moisture behind the render and causes the same failure again.

Is this a chimney job or a stucco job?

Both, which is the problem. The water is usually entering at a chimney detail — crown, flashing or chase cover — and the damage shows in the render.

Call now How it works