Independent contractors, licensed in FL

612 cities and towns covered

Dryer Vent Cleaning in Florida

The dryer vent is the appliance that matters most in a Florida house and the one nobody thinks about. Long attic runs with several elbows are exactly the configuration that packs solid with lint.

Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about dryer vent cleaning

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Dryer Vent Cleaning in Florida

What to ask for on Dryer Vent Cleaning

  • Full duct cleaning, not just the trap
  • Long attic runs and multiple elbows
  • Condominium riser assessment
  • Backdraft damper and hood check
Call us about this
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Dryer vent cleared end to end in Florida
Dryer vent cleared end to end Long attic runs with several elbows pack solid with lint. The trap catches only a fraction of it.
Stucco cut back to sound material in Florida
Stucco cut back to sound material Patching over debonded render bonds new material to something that has already let go.
Stainless cap fitted and secured in Florida
Stainless cap fitted and secured Stainless throughout including the fixings, and mechanically fixed rather than friction-fitted for storm uplift.

Why Florida runs are worse than most

Builders here route dryer ducts through attic space to reach an exterior wall, and in a single-story house on a slab that frequently means a long horizontal run with three or four elbows in it. Every elbow slows the air and every slow point collects lint.

A restricted duct makes the dryer run hotter and run longer to do the same load. Hotter and longer, with lint accumulating, is the combination that matters — and it is entirely preventable.

The signs are easy to read

A load needing two cycles. The laundry room noticeably hot. A damp or musty smell. The dryer shutting off on its thermal cutout. Any one of those means restricted airflow.

Flexible foil duct is the worst case

Ribbed flexible duct catches lint at every ridge and crushes behind the appliance. Rigid or semi-rigid metal is what should be there, and replacing a crushed flexible run is frequently more useful than cleaning it.

Condominiums are the bigger risk

A great deal of Florida housing is condominium stock, and in those buildings individual units discharge into a shared vertical riser that runs up through the building. No single owner maintains it, the association frequently has not thought about it, and it loads with lint from every unit on the stack.

That is a genuine fire risk and it is one where the answer is a conversation with the association rather than a visit to one apartment.

Who is responsible

Usually the run inside your unit is yours and the shared riser is the association's. Neither party maintains what they believe belongs to the other. Ask the association directly when the riser was last cleaned — frequently nobody knows.

Booster fans

Long runs and high-rise risers sometimes have booster fans fitted. They have their own lint screens and their own service requirement, and they are missed even more often than the ducts.

Dryer Vent Cleaning — frequently asked questions

How often should a dryer vent be cleaned?

Annually for a typical household, more often with a long run, multiple elbows, or heavy use.

Is the lint trap not enough?

No. The trap catches a fraction. The rest goes into the duct and accumulates where the air slows — at elbows and along horizontal runs.

How do I know it needs doing?

Two cycles to dry a load, a hot laundry room, a damp smell, or the dryer cutting out on thermal overload.

Who cleans a condominium riser?

The association, normally. Individual owners can only clean their own run. Raise it with the board if nobody can say when it was last done.

Can I do it myself?

Kits exist for short straight runs. A long attic run with several elbows needs proper rotary equipment and someone who can get to both ends.

Call now How it works