Independent contractors, licensed in FL

Covering 18 ZIP codes

Chimney Flashing Repair in Hollywood, FL

After Ian and Michael an enormous amount of Florida roofing was replaced at speed, and chimney flashing is the detail that gets rushed. It is the most common source of chimney leaks in the state right now.

  • Covering 18 Hollywood ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about flashing repair in Hollywood

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Flashing Repair in Hollywood, Florida

What to ask for on Chimney Flashing Repair in Hollywood

  • Step and counter-flashing done properly
  • Reglet cut into masonry or stucco
  • Terracotta barrel tile detailing
  • Post-storm reroof review
Call about flashing repair
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Hollywood. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Dryer vent cleared end to end in Hollywood, FL
Dryer vent cleared end to end Long attic runs with several elbows pack solid with lint. The trap catches only a fraction of it.
Stucco cut back to sound material in Hollywood, FL
Stucco cut back to sound material Patching over debonded render bonds new material to something that has already let go.
Stainless cap fitted and secured in Hollywood, FL
Stainless cap fitted and secured Stainless throughout including the fixings, and mechanically fixed rather than friction-fitted for storm uplift.

Chimney Flashing Repair in Hollywood

Much of Hollywood's housing was built before central cooling was normal and often before ductwork was, so heating and cooling arrived separately and at different times. That is why so many houses here run a boiler for heat and something entirely different for cooling.

About 52% of homes in Hollywood predate 1970, so the original heating system has usually been replaced at least once and cooling added afterward; 88% of them heat with electricity, so a fireplace here is used by choice rather than by necessity and tends to be inspected far less often. (US Census ACS 2022)

The barrel tile detail

Flashing under terracotta barrel tile has to be done by lifting the tiles, stepping and counter-flashing the metal against the underlayment, and relaying the tiles. It is slow and it is skilled.

What happens instead, constantly, is that tile gets bedded in mortar over the top of the joint. It looks finished and it sheds water for a year or two. Then the mortar cracks, and because the water is now getting in under the tile rather than over it, the damage is hidden until it appears inside.

On a stucco chimney

Counter-flashing must be let into a cut reglet and the render made good over it. Caulking metal to the face of stucco is not a detail and it will not last a Florida summer.

Telling flashing from other leaks

Flashing leaks appear with wind-driven rain and often stop in ordinary showers. A cracked crown leaks in any rain. A corroded chase cover leaks continuously but shows as staining rather than dripping.

If your roof was replaced on a claim

Mass post-storm replacement is done at volume and at speed. Crews unfamiliar with chimney detailing take the fastest route, and the chimney is a small part of a big job.

Worth a look now rather than later

A flashing bedded in sealant during a 2023 reroof is likely failing about now. Finding it before it has soaked framing is considerably cheaper.

Get photographs

Ask whoever inspects to photograph the flashing detail specifically. It is the one part of a chimney you cannot assess from the ground at all.

The full guide: everything about chimney flashing repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Hollywood.

Areas we cover in Hollywood

We work throughout Hollywood, including the areas around ArtsPark at Young Circle, Beverly Park, Boulevard Heights West and Bridgeport.

Chimney Flashing Repair in Hollywood — FAQs

How quickly can someone get to me in Hollywood?

For a routine inspection or sweep, usually within a few days, and sooner outside the fall rush. Late spring through early fall is the quiet season and the easiest time to book. If you have had a chimney fire, or you can smell gas or have a carbon monoxide alarm sounding, that is not a scheduling question — leave the building and call emergency services from outside.

My fireplace smokes into the room. What is wrong?

Several possible causes, and they need different work. A blocked cap or arrestor, a damper not opening fully, a smoke chamber that was never parged, a flue too small for the fireplace opening, or a chimney too short relative to the roof around it. A house sealed tight enough to run under negative pressure will also pull air down the flue. An inspection separates them; guessing does not.

Should the chimney be repaired or rebuilt?

It depends how far the damage goes. If a key scrapes mortar out but the brick is intact, that is repointing. Once brick faces have flaked through, a brick can be rocked by hand, or the stack leans, repointing has nothing sound to bond to and a rebuild is the honest answer. Most rebuilds stop at the roofline, because that is the section taking weather from every side.

Do you charge for a quote in Hollywood?

We charge nothing at any point — contractors pay us, you never do. What a company charges to attend or to carry out an inspection is theirs to set, so agree it with them before they come out. An inspection is a real piece of work with a written report attached, and it is reasonable for it to be chargeable.

How often should a chimney be inspected?

Annually, whatever it vents — that is the NFPA 211 standard and it covers gas and oil appliances as well as wood. Sweeping frequency is separate and depends on what and how much you burn. An appliance used twice a year still needs the annual look, and those are the ones where neglected faults turn up.

Do we need a chimney liner?

If a camera survey finds cracked tile, washed-out joints or a separated liner, yes. You also need one whenever the flue is the wrong size for the appliance now venting into it, which is the common case after any change of fuel or appliance. A liner is sized from the appliance manufacturer venting tables, not from what happens to fit down the chimney.

Can flashing just be sealed?

As a stopgap, yes. As the repair, no — and in Florida sun and rain, sealant fails fast.

How long should flashing last?

Properly detailed metal outlasts the roof covering. Sealant gives a season or two.

Neighborhoods we cover in Hollywood

Chimney & Vent work across Hollywood and the areas around it.

  • Boulevard Heights West
  • California
  • Charleston
  • Driftwood West
  • Emerald Hills
  • Great Mills
  • Hollywood Hills
  • Johns Island
  • Leonardtown
  • Mechanicsville
  • North Ocean Drive Corridor
  • Park West
  • Pembroke Pointe
  • Ravenel
  • River Run
  • Scottsboro
  • Silver Isles
  • Stevenson
Call now How it works